AS 1288 Supp 1-2006
|
ID： |
91FEC75DE68D46AABC6D65525C1731D8 |
|
文件大小(MB)： |
1.72 |
|
页数： |
213 |
|
文件格式： |
|
|
日期： |
2007-12-6 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
AS 1288 Supp 1—2006,AS 1288 Supplement 1—2006,Glass in buildings—Selection and,installation,(Supplement to AS 1288—2006),AS 1288 Supp 1—2006,Accessed by TAFE QUEENSLAND INSTITUTES on 04 Jan 2007,This Australian Standard Supplement was prepared by Committee BD-007, Glazing,and Fixing of Glass. It was approved on behalf of the Council of Standards,Australia on 17 March 2006.,This Supplement was published on 28 March 2006.,The following are represented on Committee BD-007:,Association of Accredited Certification Bodies,Australian Building Codes Board,Australian Chamber of Commerce and Industry,Australian Glass and Glazing Association,Australian Industry Group,Australian Institute of Building Surveyors,Australian Shop and Office Fitting Industry Association,Australian Window Association,Building Research Association of New Zealand,CSIRO Manufacturing and Infrastructure Technology,Department of Local Government WA,Energy Efficiency and Conservative Authority of New Zealand,Housing Industry Association,Institution of Engineers Australia,International Window Film Association Institute,Master Builders Australia,Monash University,New Zealand Plastics Glazing Materials Suppliers,New Zealand Safety Glass Association,Plastics and Chemicals Industries Association Incorporated,University of New South Wales,University of Sydney,Window Association of New Zealand,Window and Door Industry Council,Keeping Standards up-to-date,Standards are living documents which reflect progress in science, technology and,systems. To maintain their currency, all Standards are periodically reviewed, and,new editions are published. Between editions, amendments may be issued.,Standards may also be withdrawn. It is important that readers assure themselves,they are using a current Standard, which should include any amendments which,may have been published since the Standard was purchased.,Detailed information about Standards can be found by visiting the Standards Web,Shop at www.standards.com.au and looking up the relevant Standard in the on-line,catalogue.,Alternatively, the printed Catalogue provides information current at 1 January each,year, and the monthly magazine, The Global Standard, has a full listing of revisions,and amendments published each month.,Australian StandardsTM and other products and services developed by Standards,Australia are published and distributed under contract by SAI Global, which,operates the Standards Web Shop.,We also welcome suggestions for improvement in our Standards, and especially,encourage readers to notify us immediately of any apparent inaccuracies or,ambiguities. Contact us via email at mail@standards.org.au, or write to the Chief,Executive, Standards Australia, GPO Box 476, Sydney, NSW 2001.,Accessed by TAFE QUEENSLAND INSTITUTES on 04 Jan 2007,AS 1288 Supp 1—2006,AS 1288 Supplement 1—2006,Glass in buildings—Selection and,installation,(Supplement to AS 1288—2006),First published as AS 1288 Supp 1—2006.,COPYRIGHT,. Standards Australia,All rights are reserved. No part of this work may be reproduced or copied in any form or by,any means, electronic or mechanical, including photocopying, without the written,permission of the publisher.,Published by Standards Australia, GPO Box 476, Sydney, NSW 2001, Australia,ISBN 0 7337 7323 0,Accessed by TAFE QUEENSLAND INSTITUTES on 04 Jan 2007,AS 1288 Supp 1—2006 2,PREFACE,This Supplement was prepared by the Australian members of the Joint Standards,Australia/Standards New Zealand Committee BD-007, Glazing and Fixing of Glass. After,consultation with stakeholders in both countries, Standards Australia and Standards New,Zealand decided to develop this Standard as an Australian Standard rather than an,Australian/New Zealand Standard.,The objective of this Supplement is to provide tables for minimum glass thicknesses,calculated for stress at the ultimate limit state wind pressures and for deflection at,serviceability limit state wind pressures. This Supplement is intended as a companion,document to AS 1288—2006, Glass in buildings—Selection and installation.,This Supplement is the result of a consensus among representatives on the Committee that it,be produced as an Australian Standard.,In the preparation of this Standard valuable assistance was given by organizations and,individuals experienced in various aspects of design and use of glass, and the Committee,acknowledges their help.,Accessed by TAFE QUEENSLAND INSTITUTES on 04 Jan 2007,3 AS 1288 Supp 1—2006,CONTENTS,Page,SECTION 1 GENERAL.. 4,SECTION 2 GLASS THICKNESS CALCULATED FOR STRESS AT,ULTIMATE LIMIT STATE—FOUR-EDGE SUPPORT 5,SECTION 3 GLASS THICKNESS CALCULATED FOR DEFLECTION AT,SE……
……